Welded bellows estimate request

Please input the estimate form of welded bellows and press the “Welded bellows estimate request” button at the end of this form. Within 2 business days, we will correspond with you.

Specification 1

Materials required：
AM350 SUS316L Hastelloy®C-22 Any material Others ）

Specification 2

Axial displacement required：
 mm
Operation range:
Bellows only  With weld groove  With frange
〜 mm
Select size
required:
(Other size)Inner diameter more than Φ   Outer diameter less than Φ 
The inner diameter of the outside interferer
Shaft diameter
 Grease coating:  Yes No
configuration

Specification 3

Temperature required:
Normal temperature Other  - deg C Baking only( deg C）
Life required:
 times
Internal pressure required:
Vacuum Atmospheric pressure Vacuum - atmospheric pressure Others gage pressure Others absolute pressure
When others gage pressure or others absolute pressure were chosen.   （ MPa)
External pressure required：
Vacuum Atmospheric pressure Vacuum - atmospheric pressure Others gage pressure Others absolute pressure
When others gage pressure or others absolute pressure were chosen.   （ MPa)
Both inside and outside operate at atmospheric pressure None Yes   

Specification 4

The He leak tolerable rate
IKC standard 1X10-9Pa m3/s)     Other X10-Pa・m3/s以下)
Perpendicular to an axis displacement
X directionmm     Y directionmm
None      XY complex displacement     XY single displacement     Click here for axial displacement
Angular displacement
  Center of angular displacement is directed later.
Rate of displacement
 mm/s   (When it's faster than 100mm/s.)
Mounting posture
Not specified Horizontal Vertical Horizontal and vertical From horizontal Inclination
Production lot number
/lot
Other use applications
 

Contact

Company name required
  Affiliated post
Name required
 
Address
Zip code  
E-mail required
  
Tel required：
 
Fax required
 
The request contact means:
E-mail Tel Fax Mailing 　（There is a possibility that it takes time by a contact in case of mailing.）